ULTRAVOLT® ADDS A NEW PRODUCT LINE TO ITS MICROSIZE OFFERING

Introducing the GMA Series Of Proportional DC to DC HV Supplies

RONKONKOMA, New York – December 05, 2013 –UltraVolt, Inc., a world-leading manufacturer of high-voltage power supplies and high-voltage power systems, announced today a brand new line of high-voltage power supplies in the microsize category, the GMA Series. The 8 models in the GMA Series range from 10V to 100VDC through 300V to 3kV output voltage with 0 to 1.5 watts of output power. The GMA Series modules operate from an input voltage of 1.2VDC to 12VDC or 2.4 to 24VDC. By proportionally controlling the input voltage to the module over this input range an output range of 10% to 100% is generated. The GMA Series of proportional DC to DC high voltage power supply modules provides designers a miniature low cost PCB mount solution with a nominal performance HV output. These modules are UL, cUL, IEC-60950-1, and Demko Recognized.

GMA Series units are protected against reversed polarity inputs, output short circuit and open circuit conditions. These converters are fully encapsulated and are 100% tested before shipment. No heat sink or electrical derating is required. Optional Isolation of the HV output from the LV input is available at 100V allowing the designer to ground the HV output at a remote point and to introduce a current sense resistor if needed. Optional low noise models deliver ≤0.1% pk-pk ripple through the use of an output filter & shielded enclosure. Typical applications for the GMA Series include drivers for pulse generators, PZT actuators, MEMS devices, laser & electro-optic modulation, ink jet printing and electrophoresis. Additional applications include Bias Supply for general purposes, detectors, Geiger-Muller tubes, Avalanche Photo Diode (APD), PMT, SiD, beam deflection and focusing in mass spectrometry (Ion Beam) and electron microscopes (E-Beam).

"UltraVolt is excited to expand its MicroSize high-voltage power supply product offering with these proportional industry standard legacy PCB footprint devices, the new nominal cost GMA series modules” said James Morrison, CEO and Co-Founder. “These devices, along with select other UltraVolt MicroSize series, enable designers to upgrade their existing systems or start something new with an enhanced High Voltage Power Supply. Whether you need a more reliable device, or something to deliver higher power and performance into new or existing high voltage bias applications, the GMA gets the job done in just 1.75 cubic inches, only 29 cubic centimeters – another way UltraVolt continues Making High Voltage Easier®."

Download the GMA Series datasheet for more information.

About UltraVolt, Inc.
UltraVolt, Inc. is a world-leading manufacturer of a comprehensive range of standard-product high-voltage power supplies and systems. UltraVolt offers world-class support to customers searching for high-voltage power supplies with short lead times and nominal to high performance for efficiency, accuracy, stability, and ripple. UltraVolt product lines range from benchtop and rackmount systems to microsize PCB-mount modules with outputs of 0 to 62V through 0 to 40kV at 0 to 100mW to 15kW. Founded in 1990, the company is based in Ronkonkoma, NY. For more information, call +1 (631) 471-4444 or visit http://www.ultravolt.com.
UltraVolt, Inc.
Making High Voltage Easier!®