This site and contents herein are ©1998-2007, UltraVolt, Inc.



Products

Triple Output "AUX" Series High Voltage Power Supply

PDF version is also available
Currently viewing page: 1 Jump to page: 1 2

Click here to request more information or to get a quote

TRIPLE OUTPUT“AUX” SERIES

HIGH VOLTAGE POWER SUPPLY

PLASTIC CASE
CONSTRUCTION:
     Epoxy-filled DAP box
     certified to ASTM-D-5948
TOLERANCE:
     Overall ± 0.050” (1.27)
     Pin to Pin ± 0.015” (0.38)
     Mounting hole
     location ± 0.025” (0.64)
MOUNTING:
     2-56 x 0.30 (7.62)
     2 places threaded post
     may not be flush to cover

NOTE:
     20W and 30W versions are an
     additional 0.062” (1.57) in height.

     -M equipped units are an
     additional 0.030” (0.76) in height.

     Contact UV Customer Service for
     drawings of models equipped
     with -E or -H options
.


Connections
1 - Input-Power Ground Return
2 - Positive Power Input
3 - Iout Monitor
4 - Enable/Disable
5 - Signal Ground Return
6 - Remote Adjust Input
7 - +5V Reference Output
8 - HV Ground Return
9 - Eout Monitor
10 - AUX Grid HV Output
11 - Spare
All grounds joined internally. Power-supply mounting points isolated from internal grounds by >100kΩ, .01uF / 50V (Max) on all models except -M, -C and -M-E configurations, which are 0Ω.


Ordering Information
Type: 0 to 10.7kVDC Main Output (Focus AUX Operational 8kV to 10.7kV)
10AUX
  0 to 16.1kVDC Main Output (Focus AUX Operational 11kV to 16.1kV)
15AUX
  0 to 21.5kVDC Main Output (Focus AUX Operational 16kV to 21.5kV)
20AUX
  0 to 26.8kVDC Main Output (Focus AUX Operational 21.5kV to 26.8kV)
25AUX
  0 to 32.2kVDC Main Output (Focus AUX Operational 26.8kV to 32.2kV)
30AUX
  0 to 37.6kVDC Main Output (Focus AUX Operational 28.2kV to 37.6kV)
35AUX
Focus Output : See Table on Pg. 1
-Fvvv
Grid Output : See Table on Pg. 1
-Gvvv
  Temperature Compensated AUX
-TC
Power: Watts Output (12 V Only)
4
  Watts Output (24 V Only)
20
  Watts Output (24 V Only)
30
Case: Plastic Case - Diallyl Phthalate
STD
  RF-Tight Aluminum Case
-C
  “Eared” Heatsink Plate (Pastic Case)
-E
Heat Sink: .400” High (sized to fit case)
-H
Shield: Six-Sided Mu-Metal Shield
-M
Wire Options: Anode Flying Lead Terminated with Connector
-ATxx
  Anode Flying Lead Shielded
-AS
  Anode Flying Lead Protected
-AP
  Focus Flying Lead Terminated with Connector
-FTxx



Rev. J 10/06

previous page

© 2003-2007 UltraVolt, Inc.
specifications subject to change without notice


UltraVolt, Inc.
1800 Ocean Ave. Frnt
Ronkonkoma, NY 11779
1-800-9HV-POWER
1-800-948-7693
631-471-4444
Fax: 631-471-4696
E-mail: csd@ultravolt.com