|
Parameter |
Specification |
Units |
|
Input voltage Vin (pins 1 & 2) |
5VDC ±0.5 (recommended) maximum: 12Vdc (reverse: -0.2V) |
VDC |
|
Input current |
For 0V output voltage: <1.6 For 100V, no load: <3 At full output voltage, full load: <50 |
mA |
|
HV output Vout (pin 4) |
0 to 100 programmable |
VDC |
|
Output Power |
0 to 100 |
mW |
|
Polarity |
Fixed positive or negative |
- |
|
HV setting (pin 3) |
Via external voltage source 0/2.5V Accuracy: ±2% at full scale |
- |
|
Max. output current Iout |
1 nominal |
mA |
|
Load voltage regulation |
±0.01% of full output voltage for no load to full load |
- |
|
Line voltage regulation |
±0.01% of full output voltage over specified input voltage range |
- |
|
Residual ripple |
<50mV peak-to-peak – ripple can be reduced to less than 10mV by adding an external 100nF small CMS capacitor |
- |
|
Temperature coefficient |
<50 |
PPM/°C |
|
Output HV monitoring |
Not available on this product |
- |
|
Output reference voltage |
Not available on this product |
- |
|
HV power ON/OFF |
Not available on this product |
- |
|
Operating temperature |
-10 to +65, Full load, Max Eout, Case Temp |
°C |
|
Storage temperature |
-10 to +70 |
°C |
|
Safeguards |
• Output current internally limited • Soft start feature: low overshoot |
- |
|
Shielding |
Ground return is to metal enclosure |
- |