|
PARAMETER |
SPECIFICATION |
UNITS |
|||||||||||
|
Input voltage Vin (pins 1 & 2) |
12 ±0.5, 15 ±0.5, or 24 ±1 |
VDC |
|||||||||||
|
Input current |
No load: 15, Full load: from 65 to 100 |
mA |
|||||||||||
|
Polarity |
Fixed positive and fixed negative |
- |
|||||||||||
|
Output Voltage |
0 to 600 |
0 to 1000 |
0 to 1250
|
0 to 1500 |
VDC |
||||||||
|
Input Voltage |
12 |
15 |
24 |
12 |
15 |
24 |
12 |
15 |
24 |
12 |
15 |
24 |
VDC |
|
Output Power |
0.5 |
0.8 |
1 |
0.5 |
0.8 |
1 |
0.5 |
0.8 |
1 |
0.5 |
0.8 |
1 |
W |
|
Output Current |
0.83 |
1.33 |
1.67 |
0.5 |
0.8 |
1 |
0.4
|
0.64
|
0.8
|
0.33 |
0.53 |
0.67 |
mA |
|
HV setting (pins 3, 4 & 5) |
Via external potentiometer, minimum resistance 10kΩ or Via external voltage source 0/5V ±0.5% at full scale, and input impedance >1MΩ |
- |
|||||||||||
|
Load voltage regulation |
±0.01% of full output voltage for no load to full load |
- |
|||||||||||
|
Line voltage regulation |
±0.01% of full output voltage over specified input voltage range |
- |
|||||||||||
|
Residual ripple |
<0.01% peak to peak at full load |
- |
|||||||||||
|
Temperature coefficient |
100ppm/°C for the maximum output voltage after starting and over temperature range 0 to 50°C |
- |
|||||||||||
|
Output HV monitoring (pin 6) |
+1V/1kV max. or -1V/-1kV max. according to model polarity output impedance = 200kΩ ±1% |
- |
|||||||||||
|
Output reference voltage (pin 5) |
5V ±0.5%, TC:50ppm/°C, max. output current: 1mA |
- |
|||||||||||
|
Operating temperature |
-10 to +65, Full Load, Max Eout, Case Temp |
°C |
|||||||||||
|
Storage temperature |
-40 to +70 |
°C |
|||||||||||
|
Safeguards |
Arc and short circuit protection |
- |
|||||||||||
|
Options |
• Flying wire for HV output instead of pin 7 • Suitable for use with an external potentiometer |
- |
|||||||||||