HV Power Supplies Accessories
|
Download PDF Data Sheet of Connectors and Accessories
View -F: RIPPLE STRIPPER® OUTPUT FILTER
View -I5/-I10: ENHANCED INTERFACE OPTIONS
Quick category links:
ACCESSORIES
MILSPEC/RUGGEDIZED HIGH ALTITUDE CONNECTORS
INDUSTRY STANDARD CONNECTORS AND CABLES
LOW VOLTAGE CONNECTORS & KITS
Note:
AT=Anode Lead Termination
FT=Focus Lead Termination
The UltraVolt product line can be fitted with a full complement of accessories, depending on the need of your application. Currently, the following accessories are available. Our products also support many different industry standard connectors. Please contact us if you have any questions.
ACCESSORIES
|
-H: HEAT SINK
For PCB-mounted “A” and “C” Series plastic package units in extended temperature environments.
|
-C: RF-TIGHT ALUMINUM ENCLOSURE
For ruggedized PCB or chassis mounting of any A or C Series unit. At frequencies greater than 500kHz, this option will reduce radiated RFI emissions 2-3 orders of magnitude.
|
-E: “EARED” MOUNTING PLATE
For chassis mounting any “A” or “C” Series plastic package unit. Requires additional length, but no additional width.
|
BR-1 & BR-2: BRACKET KITS
For chassis mounting any A or C Series plastic package unit. Requires additional width, but no additional length.
|
BR-18: BRACKET KITS
For chassis mounting any "AA" Series plastic package unit. Requires additional width, but no additional length.
|
BR-7 & BR-8: BRACKET KITS
For chassis mounting High Power “C” Series units.
|
-M: SIX-SIDED MU-METAL SHIELD
Six-sided wrap-around feature is compatible with all accessories. At frequencies from 1Hz through 600Hz, this option will reduce radiated RFI & EMI emissions by 4-5 orders of magnitude.
|
USB-HV-RACK
USB control for an HV Rack® system. Enables users to control and monitor an HV Rack system via a PC.
|
-F: RIPPLE STRIPPER® OUTPUT FILTER For the A, 10A-25A, or 30A-40A Series units. Reduces ripple 10 to 100 times. For greater performance, the –M Option (wrap-around Mu-Metal shield) should be used.
Units 10kV and above require the-F-M options be used in conjunction to achieve this ripple reduction.
Download the -F Ripple Stripper® Output Filter.
|
-I5/-I10: ENHANCED INTERFACE OPTIONS For the AA Series, 10A Series, and High Power C Series. Enhanced interface options that feature a +5V/+10V control and monitoring and constant voltage/constant current auto-crossover.
Download the –I5 Option and -I10 Option datasheet.
|
|
|
| LOW VOLTAGE CONNECTORS & KITS |
CONN-KIT-FL
Wire Harness Kit for FL Series Units
AMP#2-87499-3 Qty 2, #1-87309-4 Qty 15
|
PCB-CONN-F
PCB-Mount Connector Kit
Allows HVPS to be mounted after PCB assembly.
AMP#534998-1 Qty 3, #1-535541-1 Qty 1
|
CONN-KIT-HP250
Wire Harness Kit for 250W C Series Units
AMP#2-87456-2 Qty 1, #87499-3 Qty 2, #1-87309-4 Qty 18, #1-480702-0 Qty 1, #350705-1 Qty 4
|
PCB-CONN-STD
PCB-Mount Connector Kit
Allows HVPS to be mounted after PCB assembly.
AMP#534998-1 Qty 2, #1-535541-1 Qty 1
|
CONN-KIT-HP
Wire Harness Kit for 60W/125W C Series Units
AMP#2-87456-2 Qty 1, #87499-3 Qty 2, #1-87309-4 Qty 18
|
PCB-CONN-HP
PCB-Mount Connector Kit
AMP#1-534998-3 Qty 1, #534998-1 Qty 2,
#1-480702-0 Qty 1, #350705-1 Qty 4
|
CONN-KIT-F
Wire Harness for -F Equipped Units
AMP#2-87499-3 Qty 1, #87499-3 Qty 3,
#1-87309-4 Qty 14
|
CONN-KIT
Wire Harness for A and C Series Units
AMP#2-87499-3 Qty 1, #87499-3 Qty 2, #1-87309-4 Qty 12
|
|
| INDUSTRY STANDARD CONNECTORS AND CABLES |
UV Option Part #: -AT20
UV Connector Part #: CN-20KV-1000
Manufacturer: Alden
Manufacturer Part #: A000.140
Mates to: CA-15KV-1000 |
UV Cable Assembly Part #: CA-40KV-1002
Manufacturer: Alden
Manufacturer Part #: B110YX10
Mates to: CN-40KV-1000 |
-AP Option
Anode Lead Protective Wrap:
Expandable, non-fraying, braided
sleeving over HV flying lead |
UV Option Part #: -AT21
UV Connector Part #: CN-30KV-1000
Manufacturer: Alden
Manufacturer Part #: F800.165
Mates to: CA-30KV-1001 or CN-35KV-1000 |
UV Option Part #: -AT23
UV Connector Part #: CN-35KV-1001
Manufacturer: Alden
Manufacturer Part #: F800.187
Mates to: CA-30KV-1001 or CN-35KV-1000 |
UV Cable Assembly Part #: CA-30KV-1001
Manufacturer: Alden
Manufacturer Part #: F404B9
Mates to: CN-30KV-1000 or CN-35KV-1001 |
-AS Option
Anode Lead Shield:
Braided shield over HV flying lead
|
UV Option Part #: -AT22
UV Connector Part #: CN-40KV-1000
Manufacturer: Alden
Manufacturer Part #: B200.200
Mates to: CA-40KV-1002 |
UV Cable Assembly Part #: CA-15KV-1000
Manufacturer: Alden
Manufacturer Part #: A400B
Mates to: CN-20KV-1000 |
UV Option Part #: -AT24
UV Connector Part #: CN-35KV-1000
Manufacturer: Alden
Manufacturer Part #: F311-1
Mates to: CA-30KV-1000 or CN-35KV-1001 |
UV Option Part #: -AT50
UV Connector Part #: CN-30KV-1001
Manufacturer: Caton
Manufacturer Part #: 14203-LX
Mates to: N/A |
UV Option Part #: -AT6
UV Connector Part #: LR-1000
Manufacturer: Amp or Jetron
Manufacturer Part #: 8-34142-1
Mates to: #6 stud |
|
|
|
Contact UltraVolt to check availability of the options below for your module:
| -B48 |
Burn In for 48 Hours instead of 24 |
| -B72 |
Burn In for 72 Hours instead of 24 |
| -B96 |
Burn In for 96 Hours instead of 24 |
| -D1 |
Customer copy of FATP 3 lines data, checks for balance |
| -D4 |
Customer copy of Full data FATP |
| -TS2 |
Thermal Cycle unit 2 cycles +85 C to -55C 1 hour soaks |
| -TS10 |
Thermal Cycle unit 10 cycles +85 C to -55C 1 hour soaks |
| -Y5 |
Add 100:1 Voltage monitor to A series units on pin 9 |
| -Y10 |
Enhanced Current Monitor |
| -HLP |
Heat Sink Low Profile, same mounting as –H uses width instead of height |
