| Parameter |
Conditions |
Models |
Units |
|
Input: |
All Types |
|
| Voltage
Range |
Full Power |
+ 23
to 30 |
VDC |
| Voltage
Range |
Derated Power Range |
+ 11
to 32 |
VDC |
| Current
|
Standby / Disable |
<
40 |
mA |
| Current
|
Max Load, Extended
Input Voltage |
Figures
A & B |
Graph |
| AC
Ripple Current |
Nominal Input, Full
Load |
<
50 |
mA p-p |
| Output: |
1/8C |
1/4C |
1/2C |
1C |
2C |
4C |
6C |
|
|
Voltage Range |
Nominal
Input |
0 to
125 |
0 to 250 |
0 to 500 |
0 to 1,000 |
0 to 2,000 |
0 to 4,000 |
0 to 6,000 |
VDC |
| Power |
Nominal Input, Max
Eout |
60 |
125 |
250 |
60 |
125 |
250 |
60 |
125 |
250 |
60 |
125 |
250 |
60 |
125 |
250 |
60 |
125 |
250 |
60 |
125 |
250 |
Watts |
| Current |
Iout, Entire Output
Voltage Range |
480 |
1000 |
2000 |
240 |
500 |
1000 |
120 |
250 |
500 |
60 |
125 |
250 |
30 |
62 |
125 |
15 |
31 |
62 |
10 |
21 |
42 |
mA |
| Ripple |
Full Load, Max Eout,
Cload =0.5uF |
<
1.0 |
< 1.0 |
< 1.0 |
< 1.0 |
< 1.0 |
< 1.0 |
< 1.0 |
V p-p |
| Overshoot |
C Load, 0 Eout to
Full Eout |
<
1V |
< 1V |
< 1V |
< 1V |
< 1V |
< 1V |
< 1V |
V pk |
| Voltage
Derating |
Max Iout, Extended
Input Voltage |
Figure
C |
Graph |
| Rise
Time |
Max Iout, Various
C Loads & Eouts |
Figures
D & F |
Table |
| Line
Regulation |
Nom. Input, Max Eout,
Full Power |
<
0.01% |
VDC |
| Static
Load Regulation |
No Load to Full Load,
Max Eout |
<
0.01% |
VDC |
| Stability |
30 Min. warmup, per
8 hr/ per day |
<
0.01% / < 0.02% |
VDC |
| Output Voltage Monitor: |
All Types |
|
| Voltage |
Full Eout Range,
Full Iout Range |
10.00 |
V per kV |
| Proportionality |
Full Eout Range,
Full Iout Range |
± 0.08% |
V per kV |
| Remote Programming: |
All Types |
|
| Input
Impedance |
Nominal Input |
+ Output
Models 1.1MΩ to GND, - Output Models 1.1MΩ to +5 Vref |
MΩ |
| Adjust
Resistance |
Typical Potentiometer
Values |
10K
to 100K (Pot across Vref. & Signal GND, Wiper to Adjust) |
Ω |
| Adjust
Linearity |
0% to 100% |
Figure
E |
Graph |
| Adjust
Voltage |
Referenced to signal
ground |
Figure
E (0 to +5 VDC) |
Graph |
| Adjust
Logic |
0 to +5 for +Out,
+5 to 0 for -Out |
+4.64
VDC for +Output or +0.36 for -Output = Nominal Eout |
|
| Reference: |
All Types |
|
| Output
Voltage |
T=+25°C , Initial
Value |
+ 5.00
± 2% |
VDC |
| Output
Impedance |
T=+25°C |
464
± 1% |
Ω |
| Stability |
Over Full Temperature
Range |
See
“A” Series Datasheet Figure F |
Graph |
| Enable: |
All Types |
|
| Power
Supply On |
Floated, or voltage
≥ TTL High |
+2.4
to 32 |
VDC |
| Power
Supply Off |
Grounded, or voltage
≤ TTL Low |
0 to
+ 0.7 ± 0.2 (Isink 1mA minimum) |
VDC |
| Temperature & Humidity: |
All Types |
|
| Humidity |
All Conditions, Standard Package |
0 to 95% non-condensing |
|
| Operating |
Full Load, Max Eout,
Case Temp. |
-40
to +65 |
°C |
| Storage |
Non-Operating, Case
Temp. |
-55
to +105 |
°C |
| Coefficient |
Over the Specified
Temperature |
± 50 |
PPM / °C |
| Thermal
Shock |
Mil-Std 810, Method
503-4, Proc. II |
-40
to +65 |
°C |
| Altitude: |
All Types |
|
| All Conditions |
Standard Package |
Sea
Level through Vacuum |
|
| Shock & Vibration:
|
All Types |
|
| Shock |
Mil-Std-810, Method
516.5, Proc. IV |
20 |
G's |
| Vibration |
Mil-Std-810, Method
514.5, Fig. 514.5C-3 |
10 |
G's |
| Packaging: |
60W/125W |
250W |
|
| Material |
Outer construction |
Aluminum
Alloy 5052-H32, Finish: Mil-C-5541 Class 1A |
Aluminum
Alloy 5052-H32, Finish: Mil-C-5541 Class 1A |
|
| Length |
Not including pins
or mounting pts |
4.00
± 0.025 (101.6±.6) |
8.00
± 0.025 (203.2±.6) |
In (mm) |
| Width |
Not including pins
or mounting pts |
4.50
± 0.025 (114.3±.6) |
4.50
± 0.025 (114.3±.6) |
In (mm) |
| Height |
Not including pins
or mounting pts |
1.075
± 0.025 (27.3±.6) |
1.075
± 0.025 (27.3±.6) |
In (mm) |
| Volume |
Not including pins
or mounting pts |
19.35
(317) |
38.7
(634) |
In3 (cc) |
| Weight |
Overall |
1.4
(.64) |
2.6
(1.18) |
Lbs (kg) |
