“F” SERIES

HIGH VOLTAGE POWER SUPPLY

PLASTIC CASE
CONSTRUCTION:
     Epoxy-filled DAP box
     certified to ASTM-D-5948
TOLERANCE:
     Overall ±0.050” (1.27)
     Pin to Pin ±0.015” (0.38)
     Mounting hole location ±0.025” (0.64)
MOUNTING:
     2-56 x 0.30 (7.62) 2 places
     threaded post may not be flush to cover

NOTE:
     20W & 30W versions are
     an additional 0.062” (1.57) in height.
     -M equipped units are an
     additional 0.030” (0.76) in height.
     Contact UV customer service for
     drawings on models equipped
     with -E or -H options.

METAL CASE
CONSTRUCTION:
     Aluminum box
     Chem film per MIL-C-5541
     Class 1A
TOLERANCE:
     Overall ±0.025” (0.64)
     Pin to Pin ±0.015” (0.38)
     Hole to Hole location ±0.025” (0.64)