Ultravolt, Inc. - Product Changes

UltraVolt, Inc. subscribes to a policy of continuous product and process improvement. Improved specifications such as a lower ripple, lower input current and higher stability are constantly being developed. Other reasons for product change would be corrections to an error in a data sheet, to change a component that is either no longer available or whose characteristics are not meeting UltraVolt's performance requirements, and our quality/reliability guidelines. As per our standard product data sheets, specifications are subject to change without notice. The purpose of this web site section is to provide our customers with the latest information regarding our products. Should your application require configuration control, UltraVolt, Inc. offers a configuration control suffix. UltraVolt, Inc. can provide the following levels of change notification:


–Q0	The Customer is notified on any and all product design and product specification changes. Customer approval is not required.
–Q1	The Customer is notified on any and all product design and product specification changes. Minor/Minimal changes do not require Customer approval. Major changes do require Customer approval.
–Q2	Reserved for future use by UltraVolt, Inc.
–Q3	The Customer's approval is required for any or all product design and product specification changes. This does not include component manufacturers or suppliers

For information on UltraVolt's configuration control program, please contact one of our experienced application engineers at 1-800-9HV-POWER (1-800-948-7693).

Latest Product Changes:

Change to Triple Output Aux Focus Wire [effective April 18, 2000]

Change to ATPs [effective November 1, 2001]

Change to 15FL cosmetic cover [effective January 26, 2004]

Change to select cosmetic covers [effective January 27, 2005]

Change to 30A and 35A high voltage output lead [effective September, 2005]