PDF version is also available

Currently viewing page: 1

Jump to page: 1 2

Click here to request more information or to get a quote

BI-POLAR HIGH POWER “C” SERIES HIGH VOLTAGE POWER SUPPLY
METAL CASE CONSTRUCTION:      Aluminum box      Chem film per MIL-C-5541      Class 1A TOLERANCE:      Overall ±0.025” (0.64)      Pin to Pin ±0.015” (0.38)      Hole to Hole location ±0.025” (0.64) MOUNTING:      Bottom mounting      #8-32 x 7/16 long threaded stud

+ HVPS Connections 1 & 8 - Input Power Ground Return 3 - Iout Monitor 4 - Enable/Disable 5 - Signal Ground Return 6 - Remote Adjust Input 7 - +5 VDC Reference Output 2, 9 &10 - Positive Power Input 11 - N/C 12 - N/C 13 - N/C 14 - Eout Monitor 15 & 16 - HV Ground Return 17 & 18 - HV Output All grounds joined internally. Power-supply mounting points isolated from internal grounds by >100kΩ, .01uF / 50V (Max).	Ordering Information Type: 0 to 125 VDC Output 1/8C   0 to 250 VDC Output 1/4C   0 to 500 VDC Output 1/2C   0 to 1,000 VDC Output 1C   0 to 2,000 VDC Output 2C   0 to 4,000 VDC Output 4C   0 to 6,000 VDC Output 6C Input: 24VDC Nominal 24 Polarity: Negative and Positive Output -NP Power: 125 Watts Output 125 (60Wx2)   250 Watts Output 250 (125Wx2) Heat Sink: .400” High (sized to fit case) -H PCB Support : (7) 0.187” Standoffs on top cover -Z11	- HVPS Connections 1 & 8 - Input Power Ground Return 3 - Iout Monitor 4 - Enable/Disable 5 - Signal Ground Return 6 - Remote Adjust Input 7 - +5 VDC Reference Output 2, 9 &10 - Positive Power Input 11 - N/C 12 - N/C 13 - N/C 14 - Eout Monitor 15 & 16 - HV Ground Return 17 & 18 - HV Output All grounds joined internally. Power-supply mounting points isolated from internal grounds by >100kΩ, .01uF / 50V (Max).

Rev. G 2/07

previous page

© 2003-2007 UltraVolt, Inc.
specifications subject to change without notice

UltraVolt, Inc.
1800 Ocean Ave. Frnt
Ronkonkoma, NY 11779
1-800-9HV-POWER
1-800-948-7693
631-471-4444
Fax: 631-471-4696
E-mail: csd@ultravolt.com