GENERAL INFORMATION:
The Bi-Polar “C” Series line of regulated DC-to-DC highvoltage converters
is an extension of the High Power “C” Series. Bi-Polar “C” Series
units contain a pair of + and - standard-product, 60-watt or 125-watt High Power “C” Series
assemblies, providing a total of 125 watts or 250 watts. By encapsulating a module
pair within one case, the cost of testing, potting, burn-in, and system integration
is reduced.
The ± HV output pair is packaged in UltraVolt's 4.5" x
8" x 1.1" standard case. This high power density is especially suited
to high-energy pulsers, amplifiers, and discharge devices with large capacitance,
fast repetition rates, or high current loads. See Application
Note 10 for more
charging information. See the High
Power “C” Series datasheet for
detailed specifications.
COMPATIBILITY:
The Bi-Polar “C” Series
matches
the standard
UltraVolt
60 watt
/ 125 watt
High Power “C” Series
for all
electrical
functions
and design
methodology,
including
wide input
range,
remote
control,
enable/disable,
output
monitors,
and local
+5 VDC
reference
output.
HIGH VOLTAGE OUTPUT:
Bi-Polar “C” Series units, like
all High Power “C” units, are
non-isolated converters. The output range
is independently adjustable from 0 to ±125V, ±250V, ±500V, ±1kV, ±2kV, ±4kV,
or ±6kV on all 60Wx2 and 125Wx2 models.
As the output voltage is reduced towards
0, the maximum current capability remains
unchanged.
Internal capacitance
is kept to a minimum to facilitate fastrise
applications. Most fast-rise applications
involve charging a storage capacitor, which
also acts as an additional output filter/storage
capacitor. If your application is continuous
DC bias power, an external filter/storage
capacitor should be added. Contact the
factory for recommended capacitor values.
OUTPUT CURRENT & VOLTAGE
MONITORS:
The
Bi-Polar “C” Series
units
contain
two
pairs
of
output
voltage
and
current
monitors,
one
pair
for
the
+
HVPS,
one
pair
for
the
-
HVPS.
See
the
High
Power “C” Series
data
sheet
along
with
Application
Note
13 and
Connection
Drawings
#3
and
#4
for
more
details.
|
HV & LV
CONNECTIONS:
Each independent HVPS in the Bi-Polar “C” Series
has a dedicated input power and control
connector. These connectors are standard,
dual-row, 7-pin headers. Each HVPS also
has a dedicated, HV-ground-return, 2-pin
header and HV output, 2-pin header.
Wire-harness
connections can be made via J-hooked and
soldered leads, AMP Mod-U connectors with
high-current pins, or other wire-applied
header connectors.
PCBs can be mounted
directly to HVPS with the headers plugged
into PCB sockets or soldered directly to
the PCB. Direct-mounted PCBs can use factory
or user-supplied standoffs mounted directly
to the (7) #4-40 & (4) #2-56 PEM nuts
provided on top of the HVPS.
MECHANICAL:
The Bi-Polar “C” Series converters are packaged in aluminum enclosures.
Both the 125W(60Wx2) and the 250W(125Wx2) versions use the 38in³ package. Chassis
wall mounting is facilitated with the four #8-32 studs. Thermal grease or elastomer
should be used prior to mounting. An optional flush-mount bracket kit allows
the unit to be surface mounted with the #8 studs removed. An optional vertical
mounting bracket and finned heatsink allow the units to be stacked side by side.
ENVIRONMENTAL:
The High Power Bi-Polar “C” Series
provides full power at case temperature from
-40 to +65°C. Extended temperature range
is available along with enhanced capabilities.
Please contact the factory. All units receive
a 24-hour burn-in prior to final testing.
|
