“A” SERIES

HIGH VOLTAGE POWER SUPPLY

PLASTIC CASE
CONSTRUCTION:
     Epoxy-filled DAP box
     certified to ASTM-D-5948
TOLERANCE:
     Overall ±0.050” (1.27)
     Pin to Pin ±0.015” (0.38)
     Mounting hole location ±0.025” (0.64)
MOUNTING:
     #2-56 x 0.30 (7.62)
     2 places threaded post
     may not be flush to cover
PINS:
     Gold-plated 0.025 (0.64) sq.
     The center of the pins and mounting holes
     is located from the center of pin 1
     Pins 1 thru 7 spacing 0.200 (5.08) on
     center, height from cover 0.470 (11.7) min
     Pins 8, 9, and 10, 11 spacing 0.100 (2.54)
     on center, height from cover 0.470 (11.7) min
NOTE:
     20W and 30W versions are an
     additional 0.062” (1.57) in height.
     -M equipped units are an
     additional 0.030” (0.76) in height.
     Contact UV customer service for
     drawings on models equipped with
     -E or -H options

METAL CASE
CONSTRUCTION:
     Aluminum box
     Chem film per MIL-C-5541
     Class 1A
TOLERANCE:
     Overall ±0.025” (0.64)
     Pin to Pin ±0.015” (0.38)
     Hole to Hole location ± 0.025” (0.64)