|
"AA" Series High Voltage Power Supply
PDF version is also available
|
Currently viewing page: 4
|
Jump to page: 1 2 3 4
|
Click
here to request more information or to get a quote
“AA” SERIES
HIGH VOLTAGE POWER SUPPLY |
PLASTIC CASE
CONSTRUCTION:
Epoxy-filled DAP box
certified to ASTM-D-5948
TOLERANCE:
Overall ±0.050” (1.27)
Pin to Pin ±0.015” (0.38)
Mounting
hole location ±0.025” (0.64)
MOUNTING:
2-56 x 0.30 (7.62) 2 places
threaded post may not be flush to cover
PINS:
Gold-plated 0.025” (0.64) sq.
The center of the pins and mounting holes
is located from the center of pin 1.
Pins 1 thru 7 spacing 0.200 (5.08) on center
Pins 8, 9, and 10, 11 spacing 0.100 (2.54) on center
NOTE:
20W and 30W versions are an
additional 0.062” (1.57) in height.
-M equipped units are an additional
0.030” (0.76) in height.
Contact UV Customer Service for drawings of
models equipped with -E or -H options.
|
 |
Ordering Information
| Type: |
0
to 62 VDC Output |
1/16AA |
| |
0 to 125 VDC
Output
|
1/8AA |
| |
0 to 250 VDC
Output |
1/4AA |
| |
0 to 500 VDC
Output |
1/2AA |
| |
0 to 1,000 VDC
Output |
1AA |
| |
0 to 2,000 VDC
Output |
2AA |
| |
0 to 4,000 VDC
Output |
4AA |
| |
0 to 6,000 VDC
Output |
6AA |
| Input: |
12VDC Nominal |
12 |
| |
24VDC Nominal |
24 |
| Polarity: |
Positive Output |
-P |
| |
Negative Output |
-N |
| Power: |
Watts Output
(12 V Only) |
4 |
| |
Watts Output
(24 V Only) |
20 |
| |
Watts Output
(24 V Only) |
30 |
| Case: |
Plastic Case
- Diallyl Phthalate |
STD |
| |
‘Eared’ Chassis
Mounting Plate |
-E |
| Heat
Sink: |
.400” High
(sized to fit case) |
-H |
| Shield: |
Six-sided Mu-Metal
Shield |
-M |
|
|
Connections
| 1 - Input-Power Ground
Return |
| 2 - Positive Power
Input |
| 3 - Iout Monitor |
| 4 - Enable/Disable |
| 5 - Signal Ground Return |
| 6 - Remote Adjust Input |
| 7 - +5VDC Reference
Output |
| 8 - HV Ground Return |
| 9 - Eout Monitor |
| 10 - HV Output |
| 11 - HV Output |
| All grounds joined
internally. Power supply mounting points
isolated from internal grounds by >100kΩ,
.01uF / 50V (Max) on all models except
-M, and -M-E configurations which are
0Ω. |
|
|
|
|
RoHS compliant units are available
on select models. Please contact
the factory for more information.
|
|
Rev. L 11/07
previous page
© 2003-2007 UltraVolt, Inc.
specifications subject to change without notice
UltraVolt, Inc.
1800 Ocean Ave. Frnt
Ronkonkoma, NY 11779
1-800-9HV-POWER
1-800-948-7693
631-471-4444
Fax: 631-471-4696
E-mail: csd@ultravolt.com
|
