HIGH POWER “8C→30C” SERIES

HIGH VOLTAGE POWER SUPPLY

METAL CASE
CONSTRUCTION:
     Aluminum box
     Chem film per MIL-C-5541
     Class 1A
TOLERANCE:
     Overall ±0.025” (0.64)
     Pin to Pin ±0.015” (0.38)
     Hole to Hole location ±0.025” (0.64)
MOUNTING (8C/10C/12C/15C):
     Bottom mounting,
     8-32 x 0.440 long threaded stud
MOUNTING (20C/25C/30C):
     8-32 x 0.112 min thread depth
     blind insert on bottom of unit
PINS:
     Gold-plated 0.025 (0.64) sq.

     The center of the pins and mounting holes
     are located from the center of pin 1

     Pins 1 thru 14 spacing
     0.100 (2.54) x 0.200 (5.08) on center,
     height from cover 0.280 (7.11) min

     Pins 15 and 16 spacing 0.100 (2.54) on
     center, height from cover 0.450 (11.43) min

     Unit requires an LGH flying lead
     connector for proper operation:
     8C to 15C = LGH1
     20C = LGH1L
     25C/30C = LGH3